Vented and Unvented Hot Water Systems
This course covers vented and unvented hot water systems including: water supply, backflow prevention, discharge arrangements and safety controls required to comply with Building Regulations Approved Document G (3).
This course covers vented and unvented hot water systems including: water supply, backflow prevention, discharge arrangements and safety controls required to comply with Building Regulations Approved Document G (3).
For more information, download the Vented and Unvented Hot Water Systems Qualification Handbook
Work notification
It is a legal requirement under the UK Building Regulations (Part G) that anyone who installs or replaces an unvented hot water cylinder (with a capacity of above 15 litres) shall notify that work with the Local Authority Building Control (LABC). The work may be notified either:
It is a legal requirement under the UK Building Regulations (Part G) that anyone who installs or replaces an unvented hot water cylinder (with a capacity of above 15 litres) shall notify that work with the Local Authority Building Control (LABC). The work may be notified either:
- via a Competent Persons Scheme (CPS) – installers may join a CPS such as Gas Safe Register*, OFTEC and HETAS, who will provide a Building Regulations Compliance Certificate.
- directly to the LABC – if the installer is not part of a CPS, the homeowner must notify the LABC prior to the work commencing or when the work begins.
Cert-ain Certification Ltd.
58A High Street
Melbourne
Derbyshire
DE73 8GJ
Tel: 01332 987220
Email: [email protected]
Company Registration No. 9251042
VAT Registration No. 215985875
58A High Street
Melbourne
Derbyshire
DE73 8GJ
Tel: 01332 987220
Email: [email protected]
Company Registration No. 9251042
VAT Registration No. 215985875
